• Havoc
  • Caius
  • redboot
  • Rules
  • Chain of Command
  • Members
  • Supported Ladders & Games
  • Downloads


JTCS new Windows 10 installation
08-19-2018, 10:23 PM,
#1
ahelp  JTCS new Windows 10 installation
(08-18-2018, 06:12 PM)Basson Wrote: Hi all

Finally upgraded from old Windows XP SP3 PC, to new Windows 10 PC.  New SSHD and old HD in same PC.

Uninstalled / deleted everything CS I could find from both HD's. 

Fresh installation to primary SSHD from JTCS disc  v.1.0 . 
Followed directly by installation  v 2.02 update.
C/matrixgames/JTCS/...

Menu screen opens but anything from there doesn't respond. Tried opening from WF, EF, RS .exe files directly.
Error: " application failed to start because side-by-side configuration incorrect ".

Any ideas what this means; fix?  Any suggestions greatly appreciated

Thanks
Jacques
Quote this message in a reply
08-20-2018, 12:36 AM,
#2
RE: JTCS new Windows 10 installation
Did you try this? https://www.drivereasy.com/knowledge/sid...0-fixed/#c
Meine Ehre heisst Treue

http://www.cslegion.com/
Quote this message in a reply
02-20-2020, 08:25 AM,
#3
RE: JTCS new Windows 10 installation
(08-19-2018, 10:23 PM)Basson Wrote:
(08-18-2018, 06:12 PM)Basson Wrote: Hi all

Finally upgraded from old Windows XP SP3 PC, to new Windows 10 PC.  New SSHD and old HD in same PC.

Uninstalled / deleted everything CS I could find from both HD's. 

Fresh installation to primary SSHD from JTCS disc  v.1.0 . 
Followed directly by installation  v 2.02 update.
C/matrixgames/JTCS/...

Menu screen opens but anything from there doesn't respond. Tried opening from WF, EF, RS .exe files directly.
Error: " application failed to start because side-by-side configuration incorrect ".

Any ideas what this means; fix?  Any suggestions greatly appreciated

Thanks
Jacques

Jacques,

Did you ever find the solution? I am having the same problem, except I havent gotten the "application failed to start because side-by-side configuration incorrect"  message but it sounds like the same issue/problem. Any help would be appreciated

John
Quote this message in a reply
02-22-2020, 12:18 AM,
#4
RE: JTCS new Windows 10 installation
John, What issue are you having, and you did reinstall the redistributables yes?
Meine Ehre heisst Treue

http://www.cslegion.com/
Quote this message in a reply
02-22-2020, 04:23 PM,
#5
RE: JTCS new Windows 10 installation
(02-20-2020, 08:25 AM)JRTXX Wrote:
(08-19-2018, 10:23 PM)Basson Wrote:
(08-18-2018, 06:12 PM)Basson Wrote: Hi all

Finally upgraded from old Windows XP SP3 PC, to new Windows 10 PC.  New SSHD and old HD in same PC.

Uninstalled / deleted everything CS I could find from both HD's. 

Fresh installation to primary SSHD from JTCS disc  v.1.0 . 
Followed directly by installation  v 2.02 update.
C/matrixgames/JTCS/...

Menu screen opens but anything from there doesn't respond. Tried opening from WF, EF, RS .exe files directly.
Error: " application failed to start because side-by-side configuration incorrect ".

Any ideas what this means; fix?  Any suggestions greatly appreciated

Thanks
Jacques

Jacques,

Did you ever find the solution? I am having the same problem, except I havent gotten the "application failed to start because side-by-side configuration incorrect"  message but it sounds like the same issue/problem. Any help would be appreciated

John





Hi John 

For the life of me cant remember how I fixed it ! Trawled the Matrix CS forum and found this fix which looked familiar.
You have to install the Microsoft Visual C ++ 2008 Redistributable Package ( correct version for your system architecture ie 32 vs 64 bit) . The detail escapes me, but I’m pretty sure this was the fix.
Hope this puts you on the right track! 




Jacques
Quote this message in a reply


Forum Jump:


Users browsing this thread: 1 Guest(s)