• Havoc
  • Caius
  • redboot
  • Rules
  • Chain of Command
  • Members
  • Supported Ladders & Games
  • Downloads
Forums
John Tiller's Campaign Series (Matrix) Scenario editor glitch - Printable Version

+- Forums (http://www.theblitz.org/message_boards)
+-- Forum: The Firing Line (http://www.theblitz.org/message_boards/forumdisplay.php?fid=1)
+--- Forum: Campaign Series (http://www.theblitz.org/message_boards/forumdisplay.php?fid=8)
+---- Forum: CS Technical Issues (http://www.theblitz.org/message_boards/forumdisplay.php?fid=271)
+---- Thread: John Tiller's Campaign Series (Matrix) Scenario editor glitch (/showthread.php?tid=73270)



John Tiller's Campaign Series (Matrix) Scenario editor glitch - CelerEtAudax - 03-25-2020

I have made a couple of East Front scenarios with the editors.   The default turn value was 30. I tried to re-set it to 20 as follows: 1-20(d) When I hit the save button, a box came up with the following information: Invalid input
Invalid turn value(s) I tried entering different figures, but the only one it would accept was the default value of 30. 
 
I then cleared the box and typed the value myself, using the format shown in the manual, but to no avail .  I would be very grateful if you could find a solution to this problem.  


Thanks in advance, Richard

P.S.  I have just tried sending the scenario files as an attachment, but the robot told me that that sort of attachment was not allowed.


RE: John Tiller's Campaign Series (Matrix) Scenario editor glitch - Jason Petho - 03-26-2020

You have to make sure the visibility turn range has changed as well.


RE: John Tiller's Campaign Series (Matrix) Scenario editor glitch - CelerEtAudax - 03-26-2020

(03-26-2020, 01:10 AM)Jason Petho Wrote: You have to make sure the visibility turn range has changed as well.

Lord love you Jason,

IT WORKED!!


RE: John Tiller's Campaign Series (Matrix) Scenario editor glitch - Jason Petho - 03-27-2020

That's great news!

Woo hoo!